Heavy Four-Side Planing and Milling Machine for Woodworking Plant

• Customization: Available
• After-sales Service: Technique Support and Site Visit
• Condition: New
• Model NO.: TX
• Certification: ISO 9001:2000
• Automation: Automatic
• Suitable for: Wood Block
• Power Source: Electric, Air Compressor
• Transport Package: as Per Customer Requirement
• Specification: QMB732R
• Trademark: TX
• Origin: China
• Production Capacity: 100 Sets Per Year

Product Description

Characteristics:

1.Fully enclosed safety shield is adopted, which can effectively avoid wood chips splashing and isolate noise, playing a role of safety protection.
2.The machine body is made of high-strength cast iron, with stable structure and good rigidity.
3.This machine is equipped with high-precision cutter shaft, with a rotating speed up to 6800 rpm, and the machined workpiece surface is more smooth and perfect.
4.Each cutter shaft is equipped with a powerful motor, which is driven independently.
5.The feeding system adopts frequency conversion speed regulation, which is more suitable for the processing requirements of various wood materials. The configuration of feeding power roller is reasonable, and the conveying wood is powerful, stable and smooth.
6.The worktable mouth plate is made of special tool steel with high hardness treatment; Other workbenches are hard chrome plated after special heat treatment, with good wear resistance and long service life.
7.The oil pump is used for centralized oil supply lubrication on the table and sliding parts, which is convenient and fast.

Specifications:

Machining Parameter
1	Max machining width (diameter of machine tool φ125)			230 mm
2	Min machining width (diameter of machine tool φ125)			20 mm
3	Max machining thickness (diameter of machine tool φ125)			160 mm
4	Min machining thickness (diameter of machine tool φ125)			8 mm
5	Min machining length (intermittent feeding)			840 mm
6	Min machining length (continuous feeding)			280 mm
7	Max lifting range of active working stage			7 mm
8	Max distance range of active guide plate			7 mm
9	Diameter of cutter shaft			φ40 mm
10	Diameter of feeding roller			φ140 mm
11	Feeding speed			6~36m/min
12	Revolution speed of cutter shaft			6800 r/min
Revolution diameter of machining tool
1	Front lower cutter shaft (horizontal blade)			φ125 mm
2	Front lower cutter shaft (Outer diameter * thickness)			φ152 * 12 mm
3	Front and rear, right vertical shaft and left vertical shaft.			φ108 ~φ200 mm
4	Upper horizontal shaft			φ108 ~φ180 mm
5	Rear lower shaft			φ108 ~φ230 mm
Motor Power
1	Front lower shaft			5.5 kw
2	Front right vertical shaft			5.5 kw
3	Left vertical shaft			7.5 kw
4	Rear right vertical shaft			7.5 kw
5	Upper horizontal shaft			7.5 kw
6	Rear lower shaft			7.5 kw
7	Feeding motor			5.5 kw
8	Crossbeam elevating motor			0.75 kw
Other parameters
1	Diameter of suction port			φ150 mm * 7
2	Pressure of air source			0.6 MPa
3	Volume of demanded air for suction system			180m3/min
4	Wind speed of suction system			30~40 m/s
5	Machine demension			5380 * 1860 * 1760 mm
6	Machine Weight			6050 Kg