Pinch Roll for Hot Cold Rolling Mill

• Customization: Available
• After-sales Service: Technique Support and Site Visit
• Warranty: 1 Year
• Model NO.: As Per Requirement Drawing
• Customized: Customized
• Condition: New
• Power Source: Electric
• Automatic Grade: Automatic
• Type: Two-Roll Cold-Hot Mill
• Certification: ISO
• Material: Cast Iron
• Transport Package: as Per Customer Requirement
• Specification: Customized
• Trademark: TX
• Origin: China
• HS Code: 8455300000
• Production Capacity: 10000 PCS Per Year

Product Description

Equipment Application
The pinch rolls are arranged after water cooling plant of finishing roll. The pinch roll is the device for steel line rolling production which mainly used for gripping rolled piece feeding into the wire discharger. Wire discharger for transportation of heliciform gripping rolled piece which diameter is 1080mm to the scattered coils cooling roll table before coil collector station.

Construction features of pinch roll & wire discharger:
Pinch roll and wire discharger are closely adjacent semi-open system. Pinch roll is arranged before entrance of wire discharger and transportation of gripping rolled piece into wire discharger. Then wire discharger will transform the gripping rolled piece to heliciform rolled piece which diameter is 1080mm and flat the rolled out to the scattered coils cooling roll table.

It is the horizontal cantilever structure. It has double roll device and one air cylinder which is used to contral roll up and down synchronous clamp. Pinch roll DC motor is used to improve drive speed by two-stage cylindrical gear. Up and down rolls are installed respectively at two swing arms. There is one air cylinder which drive the up and down roll synchronous close to or leave rolling line by a group of crank-link mechanism. There is equipped with adjustable limit equipments to adjust pinch roll max opening degree and minimum center distance between up and down roll. So that it could adjust the clamp forece and wire rod simultaneously. Pinch roll drive gear box used welding structure. The gear and bearings used thin oil central lubrication process. And the bearings are used filmatic bearing and high speed roll thrust bearing. Pinch roll is long running at regular work and its speed is setted by process requirement. Pinch roll can clamp the head, end or whole wire rod on the basis of process requirement.



 

1.Down Pinch Roll;	2.Up Pinch Roll;	3.Swin Rack;	4.Jack to Adjust Roll Gap;	5.Body Rack;
6.Slide Carraige;	7.Up Guide Plate;	8.Down Guide plate;	9.Air Cylinder.